Factory Price 1070 Aluminum Alloy Sheet O Temper For Electronics,
Cable, Capacitors
1070 Aluminum alloy sheet, plate
1070 aluminum plate contains 99.7% aluminum, and has the
characteristics of high plasticity, corrosion resistance,
electrical conductivity and thermal conductivity. Use its
advantages to make some structural parts with specific properties,
such as wire and cable protective nets, cores and ventilation
System parts and decorative parts.
1070 aluminum alloy sheet advantages:
1. Aluminum alloy has long service life, low cost, and high
recycling value.
2. 1070 hot-rolled aluminum plate has high plasticity, corrosion
resistance, good electrical and thermal conductivity, and can
accept contact welding and gas welding.
3. Our company strictly controls the processing quality, texture,
grain structure, composition etc. of the product, and the product
performance reaches the international advanced level, and has
gained very good reputation by customers at home and abroad!
1070 aluminum plate thickness:
The production thickness ranges from 1-500mm, and the maximum width
reaches 2650mm.
Our company supplies 1070 hot-rolled aluminum plates, 1070
medium-thick aluminum plates, 1070 ultra-wide aluminum plates, 1070
pattern aluminum plates, etc.
Specifications:
| Grade: | 1050, 1060, 1100 | Temper: | O, H12, H14, H16, H18, H116 |
| Thickness: | 0.2-6.0mm | Width: | 600-2280mm |
| Delivery Time: | 35 Days | Application: | Industry Traffic Aircraft |
| Type: | Sheet | Alloy Or Not: | Non-Alloy |
| High Light: | Aluminum Sheet Plate, Aluminum Alloy Plate
|
Mechanical Property:
| Alloy | Temper | Thickness | Width | Burr | Conductivity | Tensile Strength(N/mm2) | Elongation(%) |
| 1050 | O | 0.2-6mm | 30-1630mm | no | 35.4m/Ω.mm2 | 60-95 | 0.08-0.2mm≥20 |
| 0.2-3.0mm≥25 |
| 1060 | O | 0.2-6mm | 30-1630mm | no | 35.4m/Ω.mm2 | 60-95 | 0.08-0.2mm≥20 |
| 0.2-3.0mm≥25 |
| 1070 | O | 0.2-6mm | 30-1630mm | no | 35.4m/Ω.mm2 | 60-95 | 0.08-0.2mm≥20 |
| 0.2-3.0mm≥25 |
| 1350 | O | 0.2-6mm | 30-1630mm | no | 35.4m/Ω.mm2 | 60-95 | 0.08-0.2mm≥20 |
0.2-3.0mm≥25
|
Mechanical Property |
| ALUMINUM | Grade | Normal | Temper | Tensile Strength | Yield Strength | Elongation% | Brinell Hardness |
| ALLOY | Temper | N/mm² | N/mm² | Plate | Bar | HB |
| 1XXX | 1050 | O,H112,H | O | 78 | 34 | 40 | - | 20 |
| 1060 | O,H112,H | O | 70 | 30 | 43 | - | 19 |
| Al-Cu | 2019 | O,T3,T4,T6,T8 | T851 | 450 | 350 | 10 | - | - |
| (2XXX) | 2024 | O,T4 | T4 | 470 | 325 | 20 | 17 | 120 |
| Al-Mn | 3003 | | O | 110 | 40 | 30 | 37 | 28 |
| (3XXX) | 3004 | O,H112,H | O | 180 | 70 | 20 | 22 | 45 |
| Al-Si (4XXX) | 4032 | O,T6,T62 | T6 | 380 | 315 | - | 9 | 120 |
| Al-Mg | 5052 | O,H112,H | H34 | 260 | 215 | 10 | 12 | 68 |
| (5XXX) | 5083 | O,H112,H | O | 290 | 145 | - | 20 | - |
| Al-Mg-Si | 6061 | O,T4,T6,T8 | T6 | 310 | 275 | 12 | 15 | 95 |
| (6XXX) | 6063 | O,T1,T5,T6,T8 | T5 | 185 | 145 | 12 | - | 60 |
| Al-Zn-Mg | 7003 | T5 | T5 | 315 | 255 | 15 | - | 85 |
| (7XXX) | 7075 | O,T6 | T6 | 570 | 505 | 11 | 9 | 150
|
Packaging:
Standard seaworthy package. Wooden pallets with plastics protection
for the coil and sheet, or to be packed as your requests.
Loading:
Total quantity from 0-50 tons, can be shipped by containers.
More than 50 tons, can be shipped by bulk vessel.
20 ft container: can load width below 2300mm, length 6000 max.
40 ft container: can load width below 2300mm, length below 12000mm
Use its advantages to make some structural parts with specific
properties, such as aluminum foil made of gaskets and capacitors,
electronic product shells, vacuum tube isolation nets, wire and
cable protective covers, nets, cores, ventilation system parts and
decorative parts.
