1050 High Quality Alloy Aluminum Sheet For Lamp And Decorations
Product Introduction
It has high plasticity, corrosion resistance, good electrical and
thermal conductivity.
1050 is a product in the pure aluminum plate series, and the
chemical composition and mechanical properties of the 1060 series
products are similar. It is basically replaced by 1060 in current
applications.
The last two Arabic numerals of the 1050 series are 50. According
to the international brand naming principle, the aluminum content
must reach 99.5% or more to be a qualified product. China’s
aluminum alloy technical standard (GB/T3880-2006) also clearly
stipulates that the aluminum content of 1050 reaches 99.5%.
Because it does not contain other technical elements, the
production process is relatively simple and the price is relatively
cheap. It is currently the most commonly used series in
conventional industries.
Industrial pure aluminum has the characteristics of high
plasticity, corrosion resistance, good electrical and thermal
conductivity, but low strength. It is not strengthened by heat
treatment and has poor machinability. It can accept contact welding
and gas welding.
Typical use / Applications:
1050 is widely used in daily necessities, lighting appliances,
reflectors, decorations, chemical industry containers, heat sinks,
signs, electronics, lamps, nameplates, electrical appliances,
stamping parts and other products.
It is used in some occasions that require high corrosion resistance
and formability, but does not require high strength. Chemical
equipment is its typical use.
Chemical composition
| Alloy, temper | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | other | AL |
| New alloy | Old alloy | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | —— | 0.07 | 0.03 | —— | Single | Total |
| 1050 | —— | 0.03 | —— | 99.50 |
Mechanical property
| Alloy and Temper | Tensile strength
Rm/Mpa | Yield strength
Rp0.2/Mpa | Elongation /% | Hardness / HBWα |
|
| 1050-H24 | 105-145 | 75 | 3 | 33 |
Physical property
| Alloy and temper | Thermal expansivity
(20-100℃)
μm/m·k | Melting range
(℃) | Conductivity
20℃(68℉)
(%IACS) | Electrical resistivity 20℃(68℉)
Ωmm2/m | Density (20℃)(g/cm3) |
|
| 1050-H24 | 23.6 | 646-657 | 61.3 | 0.0281 | 2.71 |
Quality characteristics
Density: 2.710g/cm³.
Category: pure aluminum (AL above 99.5%)
Aluminum plate varieties: bright aluminum plate, brushed aluminum
plate, pattern aluminum plate, film aluminum plate...
Supply status: H24, H14, H12, H26, H18, O...
Thickness: 0.2mm-50mm
Width: 1000/1220/1250/1500/2000mm or as you required.
Length: 2000/2440/2500/3000/6000mm or as you required.
