Aluminum silver paste should be kept away from sunshine and rain in
the sealed state, and kept in a dry room (below 35 ℃). Please use
it as soon as possible, and after use, it should be completely
sealed to prevent the volatilization of solvents and additives; to
avoid blackening and oxidation caused by the drying of the paste.
1. Imitation silver plating series: excellent brightness, metal sense and covering power.
2. Silver flash series: with unique flashing effect and metal sensitive brightness, it is
widely used in automobile paint, motorcycle paint, bicycle paint
and high-quality industrial paint.
3. Fine silver series: excellent whiteness, covering power and metal effect.
4. Floating aluminum paste: it has better reflection of visible light, infrared light and
ultraviolet light, and has higher anti-corrosion ability.
Widely used in packaging color printing, printing and dyeing,
fabric silver printing, coating, paint ink, printing, screen
printing, printing and dyeing, crafts, plastic, silica gel, paper
industry, fluorocarbon paint, plastic, leather and other
industries.
Product addition ratio:
The manufacturers of floating aluminum paste can produce special
effects that are different from ordinary coatings, not only because
the product itself has very excellent characteristics, but also
requires certain skills in use to achieve satisfactory results.
First of all, the distribution of the coating must be uniform and
it can be completely dispersed in the coating system. When adding
additives, the action is gentle, otherwise the internal structure
will be damaged. When mixing with other paints, mix according to
the following addition ratio:
Colored primer> aluminum silver paste addition ratio 1%-4%
The proportion of aluminum silver paste for pure silver primer is
4%-10%
The proportion of aluminum silver paste added in single-layer
metallic flash paint is 5%-13%
Anti-corrosion paint, canning, and coil coating aluminum silver
paste addition ratio 10%-13%
Floating aluminum paste manufacturers remind you to also pay
attention to that, you must pay attention to the sealed storage of
the product to avoid the volatilization of the solvent, otherwise
it will cause the shrinkage of the coating film, change the
internal structure of the product, affect the properties of the
product, and ultimately cause use not effectively.
